Ridge Cap Units
Western Red Cedar hip and ridge roofing caps; provides attractive finish and protection where shingled roof joints meet; certi-label product assurance.
- Western Red Cedar hip and ridge roofing caps
- Provides attractive finish and protection where shingled roof joints meet
- Certi-label product assurance
- Pre-formed to save construction and installation time
HAND-SPLIT & RESAWN SHAKE HIP & RIDGE CAP UNITES
TAPERSAWN SHAKE HIP & RIDGE CAP UNITS
#1 18″ PERFECTION HIP & RIDGECAP UNITES
Hip & Ridge cap Unites manufactured from #1 Grade 18″ Perfections.
#2 18″ PERFECTION HIP & RIDGECAP UNITES
Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 18-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.
Premium 18″ x 5/8″ Tapersawn Hip & Ridgecap Units
Manufactured from quality Premium Grade shakes. Lengths 18-inch; thickness 5/8″; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle
#1 24″ x 5/8″ Tapersawn Hip & Ridgecap Units
Manufactured from quality Number 1 Grade shakes. Lengths 24-inch, Thickness 5/8″; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.
#2 24″ x 5/8″ Tapersawn Hip & Ridgecap Units
Manufactured from Number 2 Grade shakes, 12″ clear from the butt, mixed grain. Lengths 24-inch, thickness 5/8″ ; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.
Hand Split and Resawn Hip and Ridge Cap Units
The following Hand-split and Resawn Hip & Ridge Cap sizes are custom cut to order.
Premium 24″ x 5/8″ Tapersawn Hip & Ridgecap Units
Manufactured from quality Premium Grade shakes. Lengths 24-inch; thickness 5/8″; widths not less than 9″ (measured on the inner surface at the butt end). 20 units per bundle.